Thermoplastic and low dielectric constants polyimides based on BPADA-BAPP

ABSTRACT

The thermoplastic and low dielectric constants polyimides were introduced. The polyimides were prepared by pyromellitic dianhydride (PMDA) or 4,4?-(4,4?-Isopropylidenediphenoxy)diphthalic anhydride (BPADA) as anhydride monomer and 4,4?-oxydianiline (ODA) or 2,2-bis(4-(4-aminephenoxy)phenyl)propane (BAPP) as amine monomer. The polyimides were well characterized by FT-IR, thermogravimetric analysis, dynamic thermomechanical analysis, dielectric measurement, and tensile test. The dielectric constants were 2.32–2.95 compared with 3.10 of ODA-PMDA polyimide, while partly polyimides were thermoplastic. The results indicated anhydride monomers, containing lateral methyl groups, made polyimides become thermoplastic. The results of molecular simulations via Materials Studio also proved this conclusion.     

电厂管理按要素划分区域精准成本控制

为了降低发电企业运行成本,本文提出按生产要素划分为水、煤、电三个区域,精准分析造成煤耗、电耗、水耗高的原因,对可控成本的关键指标采取针对性措施,实现了电厂降低生产成本、节能降耗的目标。     

掺杂EBS润滑剂的粉末冶金铝合金脱脂工艺研究

文章通过冷压-烧结制备了掺杂EBS润滑剂的粉末冶金铝合金,比较了单/多温段脱脂工艺优劣,发现多温段脱脂优于单温段脱脂,脱脂更彻底,但由于气体流量不能无限大,导致气氛脱脂得到的样品碳含量无法达到碳剩余理论值0.02%。研究了真空脱脂和空气负压脱脂机制,真空脱脂可使得EBS热分解的气态有机物和灰分从压坯表面逸出,并被及时带出炉外,最终合金碳含量接近碳剩余理论值0.02%；空气负压脱脂可使得残余碳被氧化逸出,脱碳更彻底,使样品碳含量低于碳剩余理论值。研究了脱脂工艺对合金力学性能的影响,真空脱脂合金力学性能优于气氛脱脂,相对密度最大为97.86%,拉伸强度最大为218.06MPa,接近未添加润滑剂合金的力学性能；空气负压脱脂虽然可使碳含量更低,但因脱脂过程中样品暴露在空气中,使得原料粉末也被氧化,导致最终的合金力学性能严重下降。     

Polytetrafluoroethylene-intercalated MXene membranes with good photothermal performance for enhanced laser ignition

Photothermal effect has been widely used in many areas such as cancer therapy, photothermal energy harvesting, and laser ignition. However, exploring reliable and efficient free-standing energy converter for enhancing the photothermal performance is still a challenge. Herein, free-standing membrane based on two-dimensional MXene (Ti₃C₂) nanosheets and polytetrafluoroethylene (PTFE) was fabricated and characterized by X-ray diffraction, scanning electron microscopy and differential scanning calorimetry, which demonstrated a drastic temperature rise by laser irradiation and was further used as energy converter for enhancing the photothermal performance of laser ignition. Furthermore, the initiating power of the laser initiator can be largely reduced by adding a thin layer of MXene/PTFE membrane above the B/KNO₃ cylinder. This work can give great promise for MXene-based membranes as the laser energy converter for reducing the initiating energy and promote the development of laser initiators with low initiating energy.     

方腔内耦合传热传质非对称流动数值模拟

对带有质热源的方腔内流体传热传质进行数值研究。针对不同Ra、Nc、Sr和Df，探究对称方腔内流体传热传质的分岔特性。结果表明：存在临界Ra_c使流体流动形态发生转变，当Ra<Ra_c时，流体流线、温度场和浓度场对称分布；当Ra>Ra_c时，流体发生偏斜。增大浮升力，流体更易发生分岔现象。增强Soret和Dufour效应可增强传热对称性并增大流体发生分岔的临界Rayleigh数。     

初始制动时预测湿式制动器热对流特性的积分方法

湿式制动器对重型车辆安全具有关键影响，以湿式制动器摩擦副间隙的冷却液压油（Automotive transmission fluid，ATF）为研究对象，考虑车辆初始制动阶段流体的黏性摩擦和层流流动特征，利用积分方法建立了摩擦副流体的非稳态能量方程，并获得了能同时满足轴向和径向边界条件的三维温度和热流密度显式解析表达式，通过简化动量方程和多项式分布假设也获得了径向速度和压力的理论解，与以往试验对比表明，压力和温度解析解与试验结果具有较好的一致性，理论模型有望推广用于液黏离合器等其他HVD装置的ATF速度场、温度场和热流密度场的理论预测。     

两池火耦合作用下柴油拱顶罐热响应的数值模拟

化工园区多池火事故是典型的高后果低概率事件。鉴于目前两池火辐射模型存在一定局限性，本文采用数值模拟方法，以3个直线排布的5000m³柴油拱顶罐为研究场景，从热释放速率、火焰形态、热辐射强度三方面分析两池火燃烧特性，并与单池火场景对比，考虑储罐间距这一影响因素，进一步研究目标储罐热响应。结果表明：采用GB 50160—2008（2018年版）规定的防火间距，两燃烧罐产生的池火会发生耦合作用，并得出目标储罐受到的热辐射强度分布，最高热辐射达17.04kW/m²；两池火作用下目标储罐的温度、Mises应力与失效时间分别为644℃、356MPa、936s，单池火为488℃、280MPa、2880s，目标储罐在两池火作用下的变形也比单池火更为严重；随着储罐间距增加，目标储罐的温度与Mises应力逐渐减小，失效时间逐渐增加，当储罐间距为标准防火间距的2.5倍（20m）时，失效时间为2800s，与单池火作用产生的失效时间2880s较为接近。本研究可为优化储罐防火间距及区域韧性提升提供理论指导。     

解决17型车钩钩体尾部裂纹措施

本文论述了17型车钩钩体生产过程的工艺改进,介绍了17型车钩钩体尾部裂纹产生的原因及采取的措施。通过工艺上采用保温暗冒口提高凝固过程补缩性,同时采用空心销孔芯提高芯子的退让性,并加强车钩钩体生产过程质量控制等措施,成功地解决了17型车钩钩体尾部裂纹问题,产品废品率由4.3%降到0.23%.     

Graphene-based polymer composites with ultra-high in-plane thermal conductivity: A comparison study between optothermal Raman spectroscopy and laser flash method

We developed a simple solution mixing and molding process for the incorporation of graphene nano-flakes (GNFs) in polymer films. Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and poly(ethylene-co-methacrylic acid) (PEMAA) were used for preparation of the samples. The orientation and stacking of GNFs were confirmed using a scanning electron microscope. The thermal conductivity values for these composites were obtained using (1) laser flash method (commercially available) and (2) an optothermal Raman (OTR) technique (homemade device). The former measures the thermal diffusivity (α) and one needs to measure the density (ρ) and the heat capacity (C_p) of the composites in order to measure the in-plane thermal conductivity (κ = α.ρ.C_p), while the latter measures the in-plane thermal conductivity directly from the relation between the excitation power and the position of the Raman resonance. The data obtained from Raman spectroscopy were analyzed, assuming heat propagation in three and two dimensions. The Raman results obtained based on the two-dimensional model were very close to the results obtained using the laser flash method with less than 10% difference. The OTRspectroscopy was found to be a promising technique for measuring the in-plane thermal conductivity of carbon-based polymer composites. PVDF-HFP and PEMAA composite films with very high in-plane thermal conductivity (25 W m⁻¹ K⁻¹) were obtained through the incorporation of GNFs (20 wt % concentration). Considering a very low thermal conductivity of these polymers (<0.2 W m⁻¹ K⁻¹), this corresponds to a large enhancement of roughly 12 400%. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48927.     

航天用多弧段封头淬火装置优化设计

提出了某航天产品用多弧段封头产品的淬火处理方法;通过有限元分析,得出了多弧段封头在底部约束情况下的热处理畸变趋势;建立了多弧段封头淬火装置的三维模型,介绍了多弧段封头淬火装置的基本结构。通过有限元分析得出在淬火装置约束下,多弧段封头热处理,总畸变量为16.0 mm,Z向15.0 mm,X向8.5 mm。通过对多弧段封头淬火装置的热畸变情况分析,提出了淬火装置的优化设计方案,优化后的多弧段封头的热处理,总畸变量为7.0 mm,Z向10.0 mm,X向3.0 mm。解决了多弧段封头热处理畸变过大问题,并通过生产验证。